Tire Cutters » Tuf-Cut II

Overview

Eagle International, the tire recycling equipment industry leader you have known for years, has come up with yet another piece of tire recycling equipment. The Eagle Tuf-Cut II is perfect for rock quarries, tire derived fuel producers, cement kilns, large tire shredding operations & tire processors. The Tuf-Cut II was designed to cut serveral car tires at a time, up to and including an off-road 29.5 x 35-34 ply bias and radial tires (tire weight up to 2,000 lbs and 30 inches across the tire tread), has a cycle time of 18 seconds and a weight of 9,850 lbs. Our patented designed tire cutter is the only in the world that will cut these tires as effectively.

Additional Information

The Eagle OTR Debeader was designed to allow for all tire recyclers to pull the heavy bead sections from all radial OTR tires. With the Eagle OTR Downsizing system we are recommending the OTR’s are downsized in the following order.

Step 1. Time to pull the steel bead bundles from the OTR tires: 5-10 minutes depending on which size tire is on the machine
Step 2. Time to bagel cut the tires into two halves through the center of the tread: 15 minutes per tire
Step 3. Time to cut the tires into pie shaped sections 10-15 minutes per bagel cut halves, time will depend on how many pieces are cut to accommodate the tire shredder used in this process.